Special Tools
Special tools and workshop equipment required
- Used Oil Collection and Extraction Unit: SMN372500
- Locking Pin: T10492
- Ruler (2 pc.): T40100
- Retaining Strap: T40155
- Oil Sump Assembly Pin: T40199
- Gearbox Support: T40206 and Gearbox Support - Drilling Template: T40206/3
- Gearbox Assembly Tool: T40213/1/2/3
- Assembly Tool: T40305
- Support: T40321
- Cover: T40322/1-4
- Hook and Support Tool: T40406
- Transmission Holder: T40407 Three-Phase Current Drive -VX54-
- Engine and Gearbox Bracket: VAS6095A
- Shop Crane: VAS6100
- Engine Bung Set: VAS6122
- Electronic Torque Wrench 3-60Nm: VAS6583
- Puller - Grease Cap: VW637/2
- Slide Hammer Set: VW771
- Engine/Gearbox Support Shackle (2 pc.): 10-222A/12
- Lifting Tackle: 3033
- Hook And Support Tool: 3311 with Hook And Support Tool - Bolt: 3311/1
- Lifting Eyebolt: 3368
- Not illustrated:
- Press Tool: T40323
- Wiring Harness Repair Set - Hot Air Blower: VAS1978/14A