Drain and Plug

Fig 1: Transmission Fluid Circuit Components Location (0CK, 0CJA, 0CLA, 0DN & 0DPA)

Courtesy of AUDI OF AMERICA, LLC

Plugs
- Replace after removing
- Tighten all the way
- For the ATF check and fill hole
Plug
- For the transmission fluid inspection and fill hole
- Tightening Specification. Refer to 2.
Transmission Fluid Pump (MTF Pump)
- Must be removed for draining the transmission fluid (MTF). Refer to TRANSMISSION FLUID PUMP, REMOVING AND INSTALLING
Bolt
- Tightening Specification. Refer to 4.
Plug/Plugs
- Replace after removing
- Tighten all the way
- For the ATF