Mounting Bracket And Ball Bearing For Left Flange Shaft, Replacing

Special tools and workshop equipment required

-- Remove the left flange shaft. Refer to LEFT FLANGE SHAFT, REMOVING AND INSTALLING .

Fig 1: Identifying Circlip -1- In Flange Shaft Groove

Courtesy of AUDI OF AMERICA, LLC

-- Remove the circlip -1- from the flange shaft.

-- Remove the ball bearing -A- from the flange shaft

Fig 2: Ball Bearing

Courtesy of AUDI OF AMERICA, LLC

-- Install the new mounting bracket -1-.

Fig 3: Ball Bearing & Bracket

Courtesy of AUDI OF AMERICA, LLC

-- Install the new ball bearing -2-.

-- Install the ball bearing -A- all the way on with the mounting bracket -B- installed.

Fig 4: Identifying Ball Bearing, Installation

Courtesy of AUDI OF AMERICA, LLC

-- Install the new circlip -1- in the flange shaft groove.

Fig 5: Identifying Circlip -1- In Flange Shaft Groove

Courtesy of AUDI OF AMERICA, LLC