Overview - All Wheel Drive Clutch

All Information for the All Wheel Drive Clutch -1- can be Found in the Repair Information. Refer to All Wheel Drive Clutch  .

Fig 1: All Wheel Drive Clutch Exploded View

Courtesy of AUDI OF AMERICA, LLC

1. All Wheel Drive Clutch
   • Removing and Installing. Refer to ALL WHEEL DRIVE CLUTCH, REMOVING AND INSTALLING .
   • Servicing. Refer to All Wheel Drive Clutch  .
   • ATF fluid level, checking. Refer to the appropriate service information. .
2. Bleeder
3. Bolt
   • 8 Nm +180°
   • Replace after removing
   • Quantity: 3
   • M8 X 70
4. Balance Weight
   • Installed depending on the version
5. Bolt
   • 28 Nm
   • Installed depending on the version
6. Bolt
   • 28 Nm
   • Installed depending on the version
7. Heat Shield
   • For driveshaft
   • Installed depending on the version
8. Heat Shield
   • For the All Wheel Drive Control Module -J492-
   • Installed depending on the version
9. Bolt
   • 8 Nm
   • Installed depending on the version
10. Bolt
    • 8 Nm +180°
    • Replace after removing
    • M8 X 100
11. O-Ring
    • Replace after removing
    • For the All Wheel Drive Control Module -J492-
12. O-Ring
    • Replace after removing
    • For the All Wheel Drive Control Module -J492-
13. All Wheel Drive Control Module -J492-

    The following are integrated in the All Wheel Drive Control Module -J492- :

    • All Wheel Drive Clutch Actuator -V622-
    • All Wheel Drive Clutch Position Sensor -G969-
    • Removing and Installing. Refer to the appropriate service information. .
14. Bolt
    • 21 Nm