Measurement Preparations For Calibrating/Aligning The Driver Assistance Systems, Quick Access Mode

Perform the following steps using "quick access" if one or more systems on the vehicle will be calibrated/adjusted (without a previous axle alignment):

Select the "quick access" mode on the wheel alignment computer when the driver assistance systems need to be calibrated/aligned or the dynamic steering needs the basic setting.

• Connect the battery charger for the battery support mode. Refer to BATTERY, CHARGING .
• Position the front wheels so they are straight.
• Check the DTC memory before starting a calibration/alignment. Fix all displayed entries.
• Vehicle accurately aligned, suspension bounced and rocked several times
• The vehicle exterior lamps are off.
• All the vehicle doors are closed.