Vibration Damper, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2023 Audi SQ8, 2023 Audi RS Q8, 2022 Audi SQ8, 2022 Audi RS Q8, and 2021 Audi SQ8. However, it is still accessible from the selected car via links, so may be relevant.
Depending on the model, preliminary work may be required. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .
-- Remove the Starter generator ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .
-- Remove the cover.
-- Remove the bolt -arrow- and the idler roller.
-- Place the Adapter :T40330/5 with Counterholder :T40330/1 on the vibration damper and secure using the M8x35 bolt -arrow- ; from the Counterholder Counter holder: T40330 (23 Nm), by placing the Spacer Sleeve :T40330/3 underneath.
-- Remove the bolt -1-.
-- Remove the bolt -arrow- and remove the counterholder and vibration damper.