LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> Q5 e Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 433 (Crankshaft, Cylinder Block (Servicing 8-Cylinder 4.0L 4V TFSI Engine Ea825)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Sub-Assembly Bracket, Removing And Installing >> A/C Compressor Bracket, Removing And Installing >> Removing

A/C Compressor Bracket, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2023 Audi SQ8, 2023 Audi RS Q8, 2022 Audi SQ8, 2022 Audi RS Q8, and 2021 Audi SQ8. However, it is still accessible from the selected car via links, so may be relevant.

All vehicles excluding RSQ8 / SQ8 / SQ7:

-- Remove the A/C compressor. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING .

Audi RSQ8 / SQ8 / SQ7:

-- Remove the A/C compressor from the bracket and tie it up on the left side. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING ON BRACKET .

Continuation for All Vehicles:

Fig 1: A/C Compressor Bracket -1- - Tightening Specifications and Sequence
GWWA13-11304Courtesy of AUDI

-- Remove the bolts -2 and 3- and the bracket -1- for the A/C compressor.