Air Intake Housing From Heater And A/C Unit, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front heater and A/C unit. Refer to HEATER AND A/C UNIT, REMOVING AND INSTALLING .
-- Remove the insulation from the air intake housing -C-.Refer to OVERVIEW - HEATER AND A/C UNIT .
-- Mark the connector to the actuators on the air intake housing and remove. Refer to OVERVIEW - ACTUATORS ON AIR INTAKE HOUSING .
-- Mark the routing of the wiring harness -A- on the air intake housing -C- (or take a picture) and remove from the air intake manifold.
-- Remove the bolts -B-.
-- Disconnect the air intake housing -C- from the heater and A/C unit evaporator housing -D-.Refer to OVERVIEW - HEATER AND A/C UNIT .