OVERVIEW - DRIVETRAIN - VEHICLES WITH ALL-WHEEL DRIVE CLUTCH >>quattro ultra<<

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Name and ratio

Fig 1: Drivetrain Components Location (AWD)

Courtesy of AUDI

1 - Transmission
- Removing and installing
- Refer to the appropriate Service Information .
2 - All-Wheel Drive Clutch
- Refer to OVERVIEW - ALL-WHEEL DRIVE CLUTCH
3 - Input Shaft All-Wheel Drive Clutch
4 - Multi-Disc Clutch
5 - All-Wheel Drive Clutch Output Shaft
6 - All-Wheel Drive Control Module -J492-
Integrated in the All-Wheel Drive Control Module -- :
- All-Wheel Drive Clutch Actuator -V622-
- All-Wheel Drive Clutch Position Sensor -G969-
- Removing and Installing. Refer to CONTROL MODULE, REMOVING AND INSTALLING .
7 - Driveshaft
- Overview. Refer to OVERVIEW - DRIVESHAFT .
- Removing and Installing. Refer to DRIVESHAFT, REMOVING AND INSTALLING .
8 - Rear Final Drive
- Overview. Refer to OVERVIEW - FINAL DRIVE .
- Removing and Installing. Refer to FINAL DRIVE .
9 - Rear Pinion
10 - Driveshaft Speed Sensor -G970-
- Removing and Installing. Refer to Driveshaft Speed Sensor -G970-, REMOVING AND INSTALLING, 0B0 "quattro ultra", 09R "quattro ultra" .
11 - All-Wheel Drive Clutch Actuator 2 -V623-
- Removing and Installing. Refer to All-Wheel Drive Clutch Actuator 2 -V623-, REMOVING AND INSTALLING, 0B0 "quattro ultra", 09R "quattro ultra" .
12 - Dog Clutch
13 - Rear Differential
A - Drivetrain (Pinion and Ring Gear) on Rear Final Drive