LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> Q5 e Premium Plus >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Crankshaft, Cylinder Block (Servicing - 4-Cylinder Direct Injection 2.0L 4V TFSI Engine (Ea 888 Generation III)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Ribbed Belt TENSIONER, Removing And Installing >> Ribbed Belt TENSIONING Damper, Removing And Installing, Vehicles With Generator >> Removing

Ribbed Belt TENSIONING Damper, Removing And Installing, Vehicles With Generator: Removing

-- Remove the ribbed belt from the tensioner. Refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and remove the ribbed belt tensioner -1- from the sub-assembly bracket.

Fig 1: Drive Belt Tensioning Damper
GWWA13-10906Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals