Radiator Shutter, Removing And Installing: Removing

-- Remove the impact member. Refer to IMPACT MEMBER, REMOVING AND INSTALLING .

-- Disconnect the refrigerant lines from the condenser. Refer to REFRIGERANT LINES, DISCONNECTING AND CONNECTING AT CONDENSER .

-- Open the cover in direction of -arrow- and disconnect the connector -1- on the Radiator Shutter Motor -V544- and free up the wire.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the connector -arrow- for the High Pressure Sensor -G65- from the bracket, disconnect it and free it up.

Courtesy of AUDI OF AMERICA, LLC

-- Release the left and right catches in direction of in direction of -arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the radiator shutter -1- toward the front.