Thermal Management Coolant Pump 4 -V620-, REMOVING AND INSTALLING: Removing

-- Remove the front noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Remove the front right wheel spoiler. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .

-- Loosen the hose clamp -arrow- and remove the air duct hose from the turbocharger.

Courtesy of AUDI OF AMERICA, LLC

-- Always seal off any open connections with plugs that are thoroughly cleaned from the :VAS6122  .

-- Disconnect the connector -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Clamp off the coolant hoses using the :3094  .

-- Place a cloth underneath to catch any escaping coolant.

-- Loosen the clamps -3- and remove the coolant hoses.

-- Remove the bolts -arrows-, remove the retaining bracket -2- and the Thermal Management Coolant Pump 4 -V620-.