Center Differential, Removing And Installing: Removing
- Transmission Installed
-- Remove the driveshaft. Refer to the appropriate service information. .
-- Drain the transmission fluid. Refer to the appropriate service information. .
CAUTION:
Transmission components could be damaged.
- The self-locking center differential is pretensioned with a pressure spring.
- Carefully remove the center differential housing from the transmission toward the rear. Otherwise the center differential could fall out of the transmission.
-- Remove the bolts from the self-locking center differential housing in the following sequence: -11 to 1-.
-- Remove the oil guide piece.
-- Secure the center differential -1- so it does not fall out or remove it toward the rear from the input shaft.