Component Location Overview - Heat Shields

Courtesy of AUDI OF AMERICA, LLC

1. Heat Shield
   • Nut: 2 Nm
   • For the rear muffler
   • Removing and Installing. Refer to REAR MUFFLER HEAT SHIELD, REMOVING AND INSTALLING .
2. Heat Shield
   • For the tunnel rear
   • Removing and Installing. Refer to HEAT SHIELD FOR REAR TUNNEL, REMOVING AND INSTALLING .
3. Heat Shield
   • Nut: 2 Nm
   • For the front of the tunnel
   • Removing and Installing. Refer to HEAT SHIELD FOR FRONT TUNNEL, REMOVING AND INSTALLING .
4. Heat Shield
   • For the rear longitudinal member
   • Right
   • Removing and Installing. Refer to REAR HEAT SHIELD FOR LONGITUDINAL MEMBER, REMOVING AND INSTALLING .
5. Heat Shield
   • Bolt: 10 Nm
   • For the front longitudinal member
   • Right
   • Removing and Installing. Refer to FRONT HEAT SHIELD FOR LONGITUDINAL MEMBER, REMOVING AND INSTALLING .
6. Heat Shield
   • Version with nut: 2 Nm
   • For the plenum chamber bulkhead
   • Removing and Installing. Refer to PLENUM CHAMBER BULKHEAD HEAT SHIELD, REMOVING AND INSTALLING .
7. Heat Shield
   • For the front longitudinal member
   • Left
   • Removing and Installing. Refer to FRONT HEAT SHIELD FOR LONGITUDINAL MEMBER, REMOVING AND INSTALLING .
8. Heat Shield
   • For the rear longitudinal member
   • Left
   • Removing and Installing. Refer to REAR HEAT SHIELD FOR LONGITUDINAL MEMBER, REMOVING AND INSTALLING .
9. Heat Shield
   • For the driveshaft
   • Removing and Installing. Refer to DRIVESHAFT HEAT SHIELD, REMOVING AND INSTALLING .