Side Spoiler, Removing And Installing: Installing

Install in reverse order of removal and note the following:

-- Check the foam seal -2- for damage.

Courtesy of AUDI OF AMERICA, LLC

• The vehicle and the spoiler must be at room temperature.
• The adhesive surfaces must be free of dirt and grease.

-- Clean the adhesive surfaces with Cleaning Solution:D 009 401 04  and let dry.

-- Fold back the ends of the protective film, or attach a pulling aid -5- to the protective film -3-.

-- Align the spoiler -4- on the rear lid -1- while paying attention to the adjustment dimension ADJUSTMENT DIMENSIONS .

-- Remove the protective film from the adhesive tape.

-- Push on the spoiler until it engages audibly on the rear lid.

-- Push the entire length of the spoiler on using the :3356  .

• Vehicle resting time is at least 30 minutes at room temperature.