Bumper Cover Side Panel, Removing And Installing: Removing

-- Remove the bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Remove the center air intake grille. Refer to CENTER AIR INTAKE GRILLE, REMOVING AND INSTALLING, BEFORE PRODUCT IMPROVEMENT .

-- Remove the radiator grille reinforcement brace. Refer to REINFORCEMENT BRACE, REMOVING AND INSTALLING .

-- Remove the bumper cover side panel securing strip. Refer to SECURING STRIP FOR BUMPER COVER SIDE PANEL, REMOVING AND INSTALLING .

Vehicles with Parking Aid: 

Fig 1: Pressing Both Catches -Arrows - To Side And Press Sensor -3- Inward From Outside

Courtesy of AUDI OF AMERICA, LLC

-- Push the retainer -1- toward the rear and push the release downward to disconnect the connector -2- on the parking aid sensor -3-.

Vehicles with Headlamp Washer System: 

Courtesy of AUDI OF AMERICA, LLC

-- Remove the coolant hose -2- from the headlamp washer system spray nozzle to do so push the release buttons -3-.

-- Free up the washer fluid hose -1- for the headlamp washer system.

Courtesy of AUDI OF AMERICA, LLC

Continuation: 

-- Free up the wiring harness.

-- Release the retainers -arrows- and remove the bumper cover side panel -2-.