Transmission Fluid, Draining And Filling: Filling
WARNING:
Danger of eye injury. Wear protective eyewear.
CAUTION:
Risk of damaging the transmission.
- Only use the specified transmission fluid (MTF) in the parts list for the dual clutch transmission 0CJ, 0CK, 0CL, 0DN, 0DP.
- Using other fluids can cause malfunctions or transmission failure.
- Note the allocation. Refer to the Parts Catalog.
- The -VAS6617- must be clean and ATF must not be mixed with another fluid! Apply transmission fluid (MTF) to the hand pump if necessary.
- Remove the plug -arrow- for the right inspection and fill hole on the transmission housing with the -T40087-.
- Slowly fill transmission fluid (MTF) using -VAS6617-.
- Transmission fluid (MTF) specification. Refer to the Parts Catalog.
- Repeat the procedure gradually every 15 seconds, until the transmission fluid is 2 mm under the lower edge of the inspection and fill hole.NOTE: It is important to foloow the waiting period to make sure the various oil spaces in the transmission are filled equally.
- Tighten the plug.
Further installation is performed in reverse order of the removal.