Radiator Shutter, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Audi Q5 e and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- Connect the refrigerant lines to the condenser. Refer to REFRIGERANT LINES, DISCONNECTING AND CONNECTING AT CONDENSER .
-- If the radiator shutter of the adjustment motor is changed in the vehicle, then a basic setting must be performed. Use the Vehicle Diagnostic Tester 01 - Adapt to adaptation values - after component replacement .