Secondary Air Injection Sensor 1 -G609-, REMOVING AND INSTALLING
WARNING: This page is about a different car, the 2022 Audi Q5 e and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Removing
-- Remove the lock carrier cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .
-- Remove the bolts -arrows- and air duct -1-.
All procedures are described. Refer to the appropriate Service Information .
Tightening Specifications
- Refer to OVERVIEW - AIR FILTER HOUSING
- Refer to OVERVIEW - BUMPER COVER .