LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> Q5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Exhaust System, Emission Controls (4-Cylinder Direct Injection 2.0L 4V TFSI Engine (Ea 888 Generation III))) >> 26 Exhaust System, Emission Controls >> Exhaust Temperature Regulation >> Exhaust Gas Temperature Sensor 4 -G648-, REMOVING AND INSTALLING >> Removing

Exhaust Gas Temperature Sensor 4 -G648-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2022 Audi Q5 e and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Disconnect the connector -1- and free up the wire.

Fig 1: Locating Exhaust Gas Temperature Sensor 3 -G495-
GWWA26-11969Courtesy of AUDI OF AMERICA, LLC

-- Remove the Exhaust Gas Temperature Sensor 4 -G648- -2-.

scientia non olet · About LEMON Manuals