Overview - Rear Lid Tail Lamps

Fig 1: Exploded View Of Rear Lid Tail Lamps

Courtesy of AUDI OF AMERICA, LLC

1. Tail Lamp
   • In the rear lid
   • Removing and Installing. Refer to REAR LID TAIL LAMP, REMOVING AND INSTALLING .
2. Nut
   • Tightening specification and sequence. Refer to Fig 2.
3. Grommet
4. Nut
   • Tightening specification and sequence. Refer to Fig 2.
5. Grommet
6. Seal
   • Replace if damaged
   • Self-adhesive
7. Nut
   • Tightening specification and sequence. Refer to Fig 2.
8. Inner Spacer
   • Replace if damaged
   • Self-adhesive
9. Outer Spacer
   • Replace if damaged
   • Self-adhesive

Tightening Specification and Sequence for the Tail Lamps 

Fig 2: Tail Lamps Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the nuts for the tail lamps to 3.5 Nm and in the sequence -1, 2 and 3-.