Thermal Management Coolant Pump 2 -V618-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2022 Audi Q5 e and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the right front wheel spoiler and loosen the right front wheel housing liners in the front area. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .
-- Disconnect the connector -3-.
-- Clamp off the coolant hoses using the :3094 .
-- Place a cloth underneath to catch any escaping coolant.
-- Loosen the clamps -2- and remove the coolant hoses.
-- Remove the bolts -1-, and remove the Thermal Management Coolant Pump 2 -V618-.