Muffler, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi Q5 e and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the rear tunnel brace. Refer to OVERVIEW - UNDERBODY TRIM PANELS .

CAUTION:

Risk of damaging the coupling due to improper handling.

- Coupling must not be bent more than 10°.

- Do not load the coupling on the cable.

-- Loosen the clamping sleeve -arrows- and push toward the rear.

Fig 1: Identifying Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Slightly lower the front muffler and remove the clamping sleeve.

-- Tie up the front muffler.

CAUTION:

Risk of accident due to the heavy weight of the muffler.

- A second technician is required for the following work steps.

-- Disengage the retaining loop -3-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 and 2- and then remove the muffler.