Transmission Fluid, Draining and Filling: Filling
WARNING:
Danger of eye injury.
- Wear protective eyewear.
CAUTION:
Risk of damaging the transmission.
- Only use the specified transmission fluid (MTF) in the parts list for the dual-clutch transmission 0CJ, 0CK, 0CL, 0DN, 0DP.
- Using other fluids can cause malfunctions or transmission failure.
- Not the allocation. Refer to the Electronic Parts Information.
- The Pressurized Gearbox Oil Filler Kit -VAS6617- must be clean and the ATF must not be mixed with another fluids! If necessary, flush the hand pump with transmission fluid.
- Remove the plug -arrow- for the right inspection and fill hole on the transmission housing with the Torx Socket - T60 -T40087-.
- Use the Pressurized Gearbox Oil Filler Kit -VAS6617- to slowly add the transmission fluid.
- Transmission fluid (MTF) specification. Refer to the Electronic Parts Information.
- Repeat the procedure gradually every 15 seconds, until the transmission fluid is 2 mm under the lower edge of the in- spection and fill hole.
NOTE:
It is important to follow the waiting period to make sure the various oil spaces in the transmission are filled equally.
- Tighten the plug.
Further installation is performed in reverse order of the removal.