Overview - MECHATRONIC
- Transmission Fluid Pan
- Removing and Installing. Refer to TRANSMISSION FLUID PAN, REMOVING AND INSTALLING .
- Bolt
- Tightening specification and sequence. Refer to Fig 2.
- Replace after removing
- M6 X 30
- Seal
- Replace after removing
- Bolt
- Tightening specification and sequence. Refer to Fig 4.
- Replace after removing
- Bracket
- Hydraulic Pressure Sensor 1 -G545- and Hydraulic Pressure Sensor 2 -G546-
- Removing and Installing. Refer to Hydraulic Pressure Sensor 1 -G545- AND Hydraulic Pressure Sensor 2 -G546-, REMOVING AND INSTALLING .
- Seals
- Replace after removing
- Contact Element
- Bolt
- 3 Nm +90°
- Replace after removing
- M6 X 25
- O-Ring
- Replace after removing
- Bleed Pipe
- Dust Ring
- Seals
- Replace after removing
- Seal
- Replace after removing
- For vehicles with Parking Lock Solenoid -N486-
- Mechatronic
- Removing and Installing. Refer to MECHATRONIC, REMOVING AND INSTALLING .
- Mechatronic Bolts
- Tightening specification and sequence. Refer to Fig 3.
- M6 X 90
- Bolt
- 3 Nm +90°
- Replace after removing
- For vehicles with Parking Lock Solenoid -N486-
- M6 X 22
- Seal
- Replace after removing
- Refer to Fig 5
- Transmission Control Module -J217-
- Oil Pipe
- For vehicles with Parking Lock Solenoid -N486-
- Wiring Guide
- Replace after removing
- Seals
- Replace after removing
- ATF Pipe
- Replace after removing
- Seals
- Replace after removing
Transmission Fluid Pan - Tightening Specification and Sequence
| Step | Bolts | Tightening Specification/Additional Turn |
|---|---|---|
| 1 | -1 to 25- | Install all the way by hand |
| 2 | -1 to 25- | 3 Nm |
| 3 | -1 to 25- | 90° additional turn |
Mechatronic - Tightening Specification and Sequence
| Step | Bolts | Tightening Specification/Additional Turn |
|---|---|---|
| 1 | -1 to 7- | Install all the way by hand |
| 2 | -1 to 7- | 8 Nm |
| 3 | -1 to 7- | 120° additional turn |
Hydraulic Pressure Sensor 1G545 and Hydraulic Pressure Sensor 2G546 - Tightening Specification and Sequence
| Step | Bolts | Tightening Specification/Additional Turn |
|---|---|---|
| 1 | -1 to 7- | Install all the way by hand |
| 2 | -1 to 7- | 8 Nm |
| 3 | -1 to 7- | 120° additional turn |
Overview - Seal