ATF Cooler - Tightening Specification and Sequence

Fig 1: Exploded View of ATF Cooler, ATF Line

Courtesy of AUDI OF AMERICA, LLC

• Tighten the bolts in steps according to the specified sequence:
  ATF Cooler - Tightening Specification and Sequence
  
  

  Step	Bolts	Tightening Specification / Additional Turn
  1.	-1-	Install all the way by hand
  2.	-1-	3 N.m +90°
  3.	-2 and 3-	Install all the way by hand
  4.	-2 and 3-	3 N.m +60°