Gear Set, Disassembling And Assembling: Notes

Special tools and workshop equipment required 

• Bearing Installer - Differential Bearing: 40-21 
• Press Piece - Trailing Arm: 2010 
• Inductive Heater: VAS6414 
• Press Plate: VW402 
• Press Piece - Multiple Use: VW412 
• Press Piece - Multiple Use: VW519 
• Thrust Piece: T10431/1 
• Gearbox Assembly Tool: T40213A 
• Socket - Xzn 18mm: T10162A 
• Press Piece - Multiple Use: 30-11 
• Press Piece - 31.5mm: VW418A 
• Hydraulic Press: VAS6178 
• Thrust Piece: T10205/13  from the Bearing Installer - Wheel Hub/Bearing Kit: T10205A 
• Press Piece - Multiple Use: VW426 
• Bearing Installer - Multiple Use: 32-111 
• Press Piece - Rod: VW407 
• Bearing Installer - Bearing Press Plate: T10084A 
• Press Plate: VW401 
• Press Piece - Multiple Use: 40-105 
• Valve Guide/Clutch Release Push Rod Seal Drift: 10-206 
• Press Piece - Rod: VW408A 
• Exhaust Pipe Wedge Set: 3140A 
• Wiring Harness Repair Set - Hot Air Blower: VAS1978/14A 
• Two-Arm Puller: VAS251001 
• Extracting Tool: T40413 

Disassembling

• Gear set removed. Refer to TRANSMISSION, DISASSEMBLING AND ASSEMBLING .
• Oil pan removed -item 5-  OVERVIEW - GEAR SET, VEHICLES WITHOUT SELF-LOCKING CENTER DIFFERENTIAL => List Item: Oil Pan.