Vibration Damper, Removing And Installing, Generator: Notes
WARNING: This page is about a different car, the 2022 Audi Q5 e and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Counterhold - Vibration Damper: T10355A
- Vibration Damper Assembly Tool: T10531
- : T10531/1
- : T10531/2
- : T10531/3
- : T10531/4
- Wrench - 21mm: T40263
- Adapter: T40314
- 24 mm Socket
Individual Components of the : T10531 :
- : T10531/1
- : T10531/2
- : T10531/3
- : T10531/4
- The vibration damper bolt -A- connects the vibration damper -1-, the timing chain sprocket -2- and the crankshaft -3- with each other. Before removing the bolt, the chain sprocket must be secured to the crankshaft as described in the following.