LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> Q5 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Electric Drive (4-Cylinder Direct Injection 2.0L 4V TFSI Engine (Ea 888 Generation III))) >> 93 Electric Drive >> Potential Equalization Cables >> Potential Equalization Cable, Removing And Installing >> POTENTIAL EQUALIZATION CABLE, REMOVING AND INSTALLING, Hybrid Battery Unit -AX1- >> Removing

POTENTIAL EQUALIZATION CABLE, REMOVING AND INSTALLING, Hybrid Battery Unit -AX1-: Removing

WARNING: This page is about a different car, the 2022 Audi Q5 e and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

High voltage increases the risk of fatal injury

Electrocution can cause severe bodily or fatal injury.

- Have an Audi high-voltage technician (HVT) or an Audi high-voltage expert (HVE) de-energize the high-voltage system.

-- De-energize the high-voltage system. Refer to HIGH-VOLTAGE SYSTEM, DE-ENERGIZING .

-- Remove the luggage compartment floor. Refer to LUGGAGE COMPARTMENT FLOOR, REMOVING AND INSTALLING .

-- Remove the nut -3- and bolt -1-.

GWWA93-11081Courtesy of AUDI OF AMERICA, LLC

-- Free up and remove the potential equalization cable -2-.