Overview - Charging Socket

WARNING: This page is about a different car, the 2022 Audi Q5 e and 2021 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Charging Socket

Courtesy of AUDI OF AMERICA, LLC

High-Voltage Cables
- To the High-Voltage Battery Charger 1 -AX4-
Mount
- For the High-Voltage Battery Charging Socket 1 -UX4-
Bolt
- 9 Nm
- Quantity: 4
Emergency Release Cable
- For charging socket
Bolt
- 8 Nm
- Quantity: 4
Electrical Connection Charge Door Unit
- Removing and Installing. Refer to FUEL FILLER DOOR UNIT, REMOVING AND INSTALLING
Battery Charging Button Module -EX32-
- With Charging Socket 1 LED Module -L263-, Immediate Charging Button -E766-, Charging Profile Selection Button -E808-
- Removing and Installing. Refer to Battery Charging Button Module -EX32-, REMOVING AND INSTALLING .
High-Voltage Battery Charging Socket 1 -UX4-
- With High-Voltage Charging Connector Lock 1 Adjuster -F498- and Charging Socket Temperature Sensor 1 -G853-
- Removing and Installing. Refer to High-Voltage Battery Charging Socket 1 -UX4-, REMOVING AND INSTALLING .
Cable Grommet
- Cannot be replaced separately