Turbocharger Vacuum Diaphragm, Replacing, 2.9L Engine, Cylinder Bank 2 (Left): Removing
WARNING: This page is about a different car, the 2024 Audi Q7 and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine cover and heat shield. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Press the release buttons on both sides and remove the EVAP system hose -arrow-.
-- Remove the vacuum hose -3- from the vacuum diaphragm; do not damage it.
-- Remove the locking spring -1- and control rod from the turbocharger operating lever.
-- Remove the nuts -arrows- and then remove the vacuum diaphragm -2-.