Section 239 (Electric Drive (6-Cylinder Direct Injection 3.0L 4V TFSI Engine Ea839))
WARNING: This page is about a different car, the 2024 Audi Q7 and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- 93 Electric Drive
- High-Voltage Components
- Warning Label
- High-Voltage Battery Unit
- Overview - High-Voltage Battery
- Hybrid Battery Unit -AX1-, VISUALLY INSPECTING AND CLASSIFYING
- Hybrid Battery Unit -AX1-, REMOVING AND INSTALLING
- Hybrid Battery Unit -AX1-, REMOVING AND INSTALLING, AUDI Q7 THROUGH 10/19/2020
- Hybrid Battery Unit -AX1-, REMOVING AND INSTALLING, AUDI Q8, AUDI Q7 FROM 10/26/2020
- PRELIMINARY WORK FOR REMOVAL OF Hybrid Battery Unit -AX1-, AUDI Q8, AUDI Q7 FROM 08/23/2021
- Hybrid Battery Unit -AX1-, REMOVING AND INSTALLING, AUDI Q8, AUDI Q7 FROM 08/23/2021
- High-Voltage Battery Leak Detection
- High-Voltage Battery Leak Detection, Battery Housing Leak Detection, AUDI Q7 Through 10/19/2020
- High-Voltage Battery Leak Detection, Battery Housing Leak Detection, Preparing For Calibration, AUDI Q8, AUDI Q7 From 10/26/2020
- High-Voltage Battery Leak Detection, Battery Housing Leak Detection, AUDI Q8, AUDI Q7 From 10/26/2020
- High-Voltage Battery Leak Detection, Coolant Circuit Leak Detection In Battery Housing, Preparing For Calibration, AUDI Q8, AUDI Q7 From 10/26/2020
- High-Voltage Battery Leak Detection, Coolant Circuit Leak Detection In Battery Housing, AUDI Q8, AUDI Q7 From 10/26/2020
- Battery Regulation Control Module -J840-, REMOVING AND INSTALLING
- High-Voltage Battery Control Module -SX6-, REMOVING AND INSTALLING
- High-Voltage Battery Components
- Overview - High-Voltage Battery
- Component Location Overview - Battery Modules
- Component Location Overview - Battery Connector
- Average Cell Voltage, Determining
- Battery Modules, Charging And Discharging
- Battery Modules, Labeling
- Battery Module, Removing
- Battery Module, Installing
- Safety Vent, Removing And Installing
- Electric Drive Power And Control Electronics
- Electric Drive Motor
- Overview - Electric Drive Motor
- Three-Phase Current Drive -VX54-, REMOVING AND INSTALLING
- Centering Bracket, Removing And Installing
- Drive Motor Temperature Sensor -G712-, REMOVING AND INSTALLING
- Drive Motor Rotor Position Sensor 1 -G713-, REMOVING AND INSTALLING:
- Torsion Damper, Removing And Installing
- Decoupler Actuator -V606-, REMOVING AND INSTALLING
- Coolant Connection, Removing And Installing
- Three-Phase Current Drive, Transporting
- DECOUPLER, Checking Ease Of Movement
- High-Voltage Cables
- Component Location Overview - High-Voltage Cables
- Component Location Overview - High-Voltage Cables, Charger, High-Voltage Heater (PTC)
- Component Location Overview - High-Voltage Cables, Electric Drive Power And Control Electronics And Hybrid Battery Unit
- Component Location Overview - High-Voltage Cables, Electric Drive Power And Control Electronics, Drive Motor And Electrical A/C Compressor
- High-Voltage Wiring Harness For High-Voltage Battery, Removing And Installing
- Drive Motor High-Voltage Wiring Harness, Removing And Installing
- Electrical A/C Compressor High-Voltage Cable, Removing And Installing
- High-Voltage Cable For High-Voltage Heater (PTC), Removing And Installing
- Component Location Overview - High-Voltage Cables
- High-Voltage System, De-Energizing
- High-Voltage System, Re-Energizing
- Potential Equalization Cables
- General Information - Potential Equalization Cable
- Component Location Overview - Potential Equalization Cables
- Potential Equalization Measurement
- Potential Equalization Cable, Removing And Installing
- Potential Equalization Cable, Removing And Installing, Electric Drive Power And Control Electronics
- Potential Equalization Cable, Removing And Installing, High-Voltage Battery Unit
- Potential Equalization Cable, Removing And Installing, High-Voltage Battery Charger 1
- Potential Equalization Cable, Removing And Installing, High-Voltage Heater (PTC)
- Charging Socket
- High-Voltage Battery Charger
- Driving Noise/Engine Noise