Turbocharger, Removing And Installing: Notes

Special tools and workshop equipment required 

• Engine Bung Set: VAS6122 
• Hose Clip Pliers: VAS6362 

• If mechanical damage (for example a destroyed compression wheel) is found on the turbocharger, just replacing the turbocharger is not enough. To avoid subsequent damage later, perform the following steps:
• Check the air filter housing, air filter element and air duct hoses for contamination.
• Check the entire charge air circuit and charge air cooler for foreign objects.
• If there are foreign objects in the charge air system, clean the charge air circuit and replace the charge air cooler if necessary.