Cylinder Bank 1 (Right) Camshaft Timing Chain

WARNING: This page is about a different car, the 2021 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Cylinder Bank 1 (Right) Camshaft Timing Chain

Courtesy of AUDI OF AMERICA, LLC

Guide Pin
- 5 Nm +45°
- Replace after removing.
Guide Rail
Gear
- With the chain sprocket for the camshaft timing chain
Camshaft Timing Chain
- Removing from the camshafts. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
- Do not separate from the tensioning rail -item 5- Cylinder Bank 1 (Right) Camshaft Timing Chain => List Item: Tensioning Rail
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .
Tensioning Rail
- Do not separate from the camshaft timing chain -item 4- Cylinder Bank 1 (Right) Camshaft Timing Chain => List Item: Camshaft Timing Chain
Mounting Pin
- 23 Nm
Bolt
- 9 Nm
Chain Tensioner
- Removing and installing. Refer to CHAIN TENSIONER, REMOVING AND INSTALLING .
Seal
- Replace after removing.
Control Valve
- For the camshaft adjuster
- Tightening specification and sequence. Refer to Installing .
O-Ring
- Replace after removing.
Camshaft Adjuster
- For the exhaust camshaft
- Allocation. Refer to the Parts Information.
- After removal replace the friction disc (diamond disc) -item 13- Cylinder Bank 1 (Right) Camshaft Timing Chain => List Item: Friction Disc (Diamond Disc)
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
Friction Disc (Diamond Disc)
- Replace after removing.
- For the connection security between the camshaft adjuster and camshaft end
- Bring the new friction disc (diamond disc) without kinking into its installation position
Camshaft Adjuster
- For the intake camshaft
- Allocation. Refer to the Parts Information.
- After removal replace the friction disc (diamond disc) -item 15- Cylinder Bank 1 (Right) Camshaft Timing Chain => List Item: Friction Disc (Diamond Disc)
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
Friction Disc (Diamond Disc)
- Replace after removing.
- For the connection security between the camshaft adjuster and camshaft end
- Bring the new friction disc (diamond disc) without kinking into its installation position
O-Ring
- Replace after removing.
Control Valve
- Tightening specification and sequence. Refer to Installing .
- For the camshaft adjuster
Gliding Piece
- Replace after removing.
Guide Pin
- 5 Nm +45°
- Replace after removing.
Guide Pin
- 5 Nm +45°
- Replace after removing.