Camshaft Housing, Removing And Installing, Cylinder Bank 1 (Right): Removing
WARNING: This page is about a different car, the 2022 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
-- Equipped on some models: remove the parking/auxiliary heater. Refer to appropriate service information. .
-- Disconnect the connector -1- for the Camshaft Position Sensor -G40-. (Shown on Camshaft Position Sensor 2 -G163-).
All additional procedures are described. Refer to CAMSHAFT HOUSING, REMOVING AND INSTALLING .