Turbocharger, Removing And Installing, Cylinder Bank 2 (Left): Removing
WARNING: This page is about a different car, the 2022 Audi RS 7 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine cover and heat shield. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Remove the connector -1- for the Oxygen Sensor 2 Before Catalytic Converter -GX11- from the bracket, disconnect it and free up the wire.
All additional procedures are described. Refer to TURBOCHARGER, REMOVING AND INSTALLING .