Standard Vehicle Height For Axle Alignment On Vehicles With Air Suspension, Checking, AUDI Q8: Notes

Checking the Standard Vehicle Height for Axle Alignment

Before performing an axle alignment on a vehicle with air suspension, check the standard vehicle height and adapt it again if necessary. Explanation of standard vehicle height. Refer to TEST REQUIREMENTS, AUDI Q8 - Vehicles with air suspension .

-- Initiate and lock the standard vehicle height. Refer to STANDARD VEHICLE HEIGHT, INITIATING AND LOCKING .

-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.

Determine the Dimension -a-.

Fig 1: Determining Height Dimension -a-

Courtesy of AUDI OF AMERICA, LLC

-- Determine dimension -a- between the center of the wheel and the lower edge of the fender/wheel housing as shown.