Wheel Bearing Unit, Removing And Installing: Removing
-- Loosen the connection between the drive axle and wheel hub. Refer to DRIVE AXLE THREADED CONNECTION, LOOSENING AND TIGHTENING .
-- Remove the brake rotor. Refer to BRAKE ROTOR, REMOVING AND INSTALLING .
-- Remove the wind deflector for the lower rear transverse link. Refer to WIND DEFLECTOR, REMOVING AND INSTALLING, FASTENING PIN VERSION WITH FASTENER .
-- Remove the bolts -arrows- and remove the wheel bearing unit from the drive axle and the wheel bearing housing.
- Handling the wheel bearing. Refer to Figure.