SUBFRAME Front Hydraulic Bonded Rubber Bushing, Replacing: Notes

Special tools and workshop equipment required 

• Torque Wrench 1332 40-200Nm: VAG1332 
• Hydraulic Press: VAS6178 
• Pneumatic/Hydraulic Foot Pump: VAS6179 
• Bearing Installer - Wheel Hub/Bearing Kit : T10205A 
• Bearing Installer - Wheel Hub/Bearing Kit - Spindle: T10205/8-1 
• Bearing Installer - Wheel Hub/Bearing Kit - Nuts: T10205/8-2 
• Bearing Installer - Wheel Hub/Bearing Kit - Support: T10205/13 
• Assembly Tool: T40328 
• Assembly Tool - Pipe: T40328/1 
• Assembly Tool - Support Ring: T40328/3 
• Assembly Tool - Support Ring: T40328/7 
• Assembly Tool - Thrust Piece: T40328/8 
• Assembly Tool - Thrust Piece: T40328/9 
• Assembly Tool - Thrust Piece: T40328/10 
• Hydraulic Press: VAS6178 

• If a bonded rubber bushing is faulty, then the bonded rubber bushing on the opposite side must also be replaced. Refer to the Parts Information for the allocation.
• Check the other bearing before switching out a defected bonded rubber bushing.
• If cracks, oil leaks or other damage is visible, this bonded rubber bushing must also be replaced.