LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> Suspension >> Rear Suspension >> 42 Rear Suspension >> SUBFRAME >> SUBFRAME, Servicing >> Rear Bonded Rubber Bushing For Rear Final Drive, Removing And Installing >> Removing

Rear Bonded Rubber Bushing For Rear Final Drive, Removing And Installing: Removing

-- Air suspension: remove the rear axle steering. Refer to REAR AXLE STEERING GEAR, REMOVING AND INSTALLING .

-- Remove the rear final drive. Refer to the appropriate Service Information .

-- Remove the nuts -arrows-, and remove the cover -1- for the air supply unit.

GWWA42-10778Courtesy of AUDI OF AMERICA, LLC

-- Unclip the air filter -1- from the bracket and push to the side with the hoses still connected -arrows-.

GWWA43-10277Courtesy of AUDI OF AMERICA, LLC

-- Install the : T40032  and : T40033  on the bonded rubber bushing and on the subframe, as shown.

GWWA42-10848Courtesy of AUDI OF AMERICA, LLC

-- Remove the bonded rubber bushing from the subframe.