Stabilizers Control Module -J736-, REMOVING AND INSTALLING, AUDI Q8: Removing

-- Remove the glove compartment. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .

-- Remove the A-pillar lower right trim panel. Refer to A-PILLAR TRIM PANEL, REMOVING AND INSTALLING .

-- De-energize the 48 Volt system. Refer to BATTERY, DISCONNECTING AND CONNECTING .

-- Disconnect the connector from the Stabilizers Control Module -J736-.

Courtesy of AUDI OF AMERICA, LLC

-- Press the two retaining tabs on the bracket back using a screwdriver. Remove the Stabilizers Control Module -J736- downward from the bracket.

Courtesy of AUDI OF AMERICA, LLC