Standard Vehicle Height, Initiating And Locking, AUDI Q8

Special tools and workshop equipment required 

• Vehicle Diagnostic Tester

-- Connect the Vehicle Diagnostic Tester.

-- Switch the ignition on.

-- Select and start the Diagnostic  operating mode.

-- Select the Test plan  tab.

-- Select the Select individual test  button and select the following tree structure consecutively:

• Diagnostic-Capable Systems 
• 0074 - Suspension control J775 
• 0074 - Suspension control functions 
• 0074 - Basic setting, initiating standard vehicle height and lock 

-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.

• If the basic setting "0074 - Basic setting initiated and lock standard vehicle height" has been activated, then basic setting "0074 - Basic setting activate regulation" must be performed..