Standard Vehicle Height, Initiating And Locking, AUDI Q7

Special tools and workshop equipment required 

• Vehicle Diagnostic Tester

-- Connect the Vehicle Diagnostic Tester.

-- Switch the ignition on.

-- Select and start the Diagnostic  operating mode.

-- Select the Test plan  tab.

-- Select the Select individual test  button and select the following tree structure consecutively:

• Suspension
• Suspension control
• 01 - OBD-capable systems
• 74 - Drivetrain Control Module J775
• 74 - Drivetrain Control Module Functions
• 74 - Basic setting
• 74 - Basic setting, Initiate and lock standard vehicle height

-- If the basic setting "74 - Basic setting, Initiate and lock the standard vehicle height" was activated, then the basic setting "74 - Basic setting, Activate control" must then be performed.