Pressure Reservoir, Removing And Installing: Removing
- Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
-- Vent the system. Refer to AIR SUSPENSION SYSTEM, FILLING AND BLEEDING .
-- Switch off the ignition.
-- Remove the rear carpet. Refer to CARPET, REMOVING AND INSTALLING .
-- Remove the air duct to the vent in the B-pillar. Refer to OVERVIEW - AIR ROUTING AND AIR DISTRIBUTION IN VEHICLE INTERIOR .
-- Slowly loosen air line -1- on pressure reservoir -2- and allow air pressure to come down. After the air pressure has escaped, remove the air line.
-- Remove the bolts -3- and the nuts -4-. Remove the pressure reservoir.