LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> Steering >> Steering Linkage >> 48 Steering >> Steering Column >> Electronic Steering Column Lock Control Module -J764-, REMOVING AND INSTALLING >> Removing

Electronic Steering Column Lock Control Module -J764-, REMOVING AND INSTALLING: Removing

-- Remove the steering column from the instrument panel crossmember and place in the driver footwell with the steering intermediate shaft attached. Refer to STEERING COLUMN, REMOVING AND INSTALLING .

-- Switch the ignition on.

-- Remove the bolts -2-.

GWWA48-10823Courtesy of AUDI OF AMERICA, LLC

-- Push the tab -1- in the direction of the -arrow-. Remove the Electronic Steering Column Lock Control Module - J764- -2-.

GWWN48-10811Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector from the Electronic Steering Column Lock Control Module -J764-.