Front Belt End Fitting, Removing And Installing, USA And CANADA Market-Specific: Removing

-- Remove the front sill panel. Refer to FRONT SILL PANEL, REMOVING AND INSTALLING .

-- Remove the belt end fitting from the bracket.

Courtesy of AUDI OF AMERICA, LLC

-- Open the cover -2- for the belt anchor -1- with a screwdriver on the catches -arrow-, open and push aside.

-- Push together the catches on the clamp with a plies -A arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- At the same time push the anchoring pins -2- together with the clamp -3- to release in the direction of -arrow B-.

-- Disengage the anchoring pins from the clamp in the belt end fitting -1-.

-- Remove the bolt -1- and then remove the belt relay -2-.

Courtesy of AUDI OF AMERICA, LLC