Seat Occupant Detection Sensors -G177-, -G178-, REMOVING AND INSTALLING: Removing
-- Remove the rear seat cushion. Refer to COVER AND CUSHION, REMOVING AND INSTALLING .
-- Unclip the bracket for the connector -1- from the passenger occupant detection sensor and free up the lines.
-- Remove the clips -2- using the : 80-200 .
-- Release the locking tabs -A arrows- on the rear seat backrest frame using a flat-head screwdriver.
-- Remove the passenger occupant detection sensor -3- from the rear seat backrest frame -arrow B-.
-- Disconnect the connector -5- for the passenger occupant detection sensor and unclip the cable holder -4-.