Overview - Passenger Occupant Detection Sensor

Courtesy of AUDI OF AMERICA, LLC

1. Passenger Seat Occupant Detection Sensor -G128-
   • Market-specific version shown
   • Clip in the seat frame until it clicks into place
   • Removing and Installing. Refer to Passenger Seat Occupant Detection Sensor -G128-, REMOVING AND INSTALLING .
2. Clip
   • Quantity: 2
3. Passenger Side Rear Seat Occupant Detection Sensor -G178-
   • Removing and Installing. Refer to Seat Occupant Detection Sensors -G177-, -G178-, REMOVING AND INSTALLING .
4. Passenger Occupant Detection System Pressure Sensor -G452-
   • Removing and Installing. Refer to Passenger Occupant Detection System Pressure Sensor -G452-, REMOVING AND INSTALLING .
5. Bolt
   • Quantity: 3
   • 1.2 Nm
6. Driver Side Rear Seat Occupant Detection Sensor -G177-
   • Clip in the seat frame until it clicks into place
   • Removing and Installing. Refer to Seat Occupant Detection Sensors -G177-, -G178-, REMOVING AND INSTALLING .
7. Clip
   • Quantity: 2