Glove Compartment, Removing And Installing: Installing

Versions with Front Passenger Airbag Deactivation Key Switch -E224- : 

-- Press the connector together until it engages audibly.

• If the Airbag Indicator Lamp -K75- indicates a fault after installing, check the DTC memory, erase it and check it again using the Vehicle Diagnostic Tester.

Continuation for All Vehicles 

Install in reverse order of removal. Note the following:

• Before installing, check all the fasteners for damage and replace if necessary.
• Make sure the connectors are pushed in all the way and that they engage audibly.
• Make sure the wires are not pinched.