Glove Compartment Handle, Removing And Installing: Removing
-- Open the glove compartment lid.
-- Release the hooks for the glove compartment handle in direction of -arrow A- through the opening on the side of the glove compartment lid with a small screwdriver -1- (approximately 80 mm long) or Torx screwdriver T10 (approximately 80 mm long).
-- At the same time, unclip the glove compartment handle -3- carefully with the Pry Lever -2- in direction of -arrow B-.
-- Press the glove compartment handle and release retaining the hook -1- at the side of the glove compartment opener using a screwdriver.
-- Pry the glove compartment handle -2- carefully off the glove compartment lid direction of the -arrow- with the Pry Lever: 80-200 .